chairfag.com Report : Visit Site

Technical data of the chairfag.com

Geo IP provides you such as latitude, longitude and ISP (Internet Service Provider) etc. informations. Our GeoIP service found where is host chairfag.com. Currently, hosted in United Kingdom and its service provider is UK NOC .

HTTP Header Analysis

HTTP Header information is a part of HTTP protocol that a user's browser sends to called Apache containing the details of what the browser wants and will accept back from the web server.

DNS

HtmlToText

chairfag because you really love chairs restoration supplies if you are usa: buy penetrol uk: buy penetrol -- restoration guide here we're going to walk through an armshell shock mount move and restoral. first of all, in this instance i had run across some orange armshells that were set up as 'wide mount'. the first thing that needs to be done is remove the old mounts. i've heard a couple ways to go about this such as tightening the bolt all the way down to pull the mount off (which i do not suggest as it can crack the fiberglass on the other side very easily). the way i go about it is to take a sharp flat head screw drive and a rubber mallet and tap around the outside to remove all visable epoxy, then lightly tap under the mount and pry lightly up around the sides untill the mount losens and comes off easily. after all the shock mounts have been removed, you'll need to get rid of any existing epoxy left on the chair. i do this by using a coarse sandpaper on an orbital sander to get the majority off, then switch to a medium then to fine for the finish. once that work has been completed it's time to mount the shocks to the standard narrow mount, so it will be able to take any or the various bases available. for this i use a spider base from a tandem set up. i've found it to be the best way to get an accurate lay out of the mounts. i first attach the mount directly to the spiderbase finger tight. make sure that they center in the holes. then with the chair upside down, place the spiderbase set up onto the chair so that the shock mounts line up on the 'flat spots' already on the chair for the narrow mount. once that is set and centered outline the outsides of the shock mounts with a marker. you now have an accurate mark for where to place your mounts. you can use just about any two part epoxy to mount your shocks. i've found that jb weld quick set seems to work the best for me and looks most original after the fact. mix enough of the epoxy so that you can get at least 4 quarter sized globs. this epoxy sets quick, you only have a couple minutes once you place it on the chair to get your mounts in place. so be hasty when placing your mounts. the reason i suggest a quick set epoxy over one that takes 8 hours to set is because your mounts will drift out of place with other such epoxies unless you keep them held into place. once you have them set in place keep them held there for a good 5 minutes to make sure your mounts dont float out of place. after the 5 or 10 minutes, remove the screws and the spider base from the mounts and let the epoxy cure over night. you want to remove the screws before it completely cure as to avoid the screws being epoxied to the mounts. as far as moving the shocks goes, you're done. next we will be restoring the fiberglass back to original luster. here we start be smoothing the edges with a fine wet sand. for the wet sand get a squirt bottle, put a couple drops of dish soap on the botton and fill up with warm water. wetting the area as you sand will prevent fiberglass dust from getting everywhere and save you and your lungs from an uncomfortable itch. go around the edges and smooth them out, then move to the rest of the chair doing a fine wet sand to the entire area, until the entire chair is smooth. once the entire chair has been done, rinse it off with water to get rid if any of the exsisting dust and let it air dry. (drying with a cloth will leave fibers that will show up in the coating process later). the chair is now ready to coat. for this i use a product called 'penetrol'. this can be picked up at any home center, is used to restore fiberglass and has many other uses such as an oil paint conditioner. you can get this from amazon: usa: buy penetrol uk: buy penetrol make sure and wear gloves while applying penetrol, you don't want to get this on your hands or anything else as it's next to impossible to get off. use a lint free cloth for application. soak the cloth in the penetrol so that it is fully saturated. apply the penetrol liberally so that it will not leave streaks. make sure that you don't put so much on as to cause dripping or sags though. it may take a little practice. apply first to the bottom of the chair, let it it set for a couple hours then attach the base, flip the chair over on it's base and apply to the rest of the chair. once it has been applied, place the chair in a safe dust free enviroment and let it cure for a couple days. penetrol take quite a while to dry as it's an oil based product. this as well makes it stronger and much more durible than a standard clear coat. **note** i do not recommend that penetrol is used on white shells, as it will yellow slightly over time. in that case i'd use a standard clearcoat. once your chair has cured, it's ready for use and will look like new for years to come. *disclaimer: this is just what we found effective! we take no responsibility for your chairs chairfag the original chair restoration site copyright 2016© social media facebook follow @chairfag

URL analysis for chairfag.com

Whois Information

Whois is a protocol that is access to registering information. You can reach when the website was registered, when it will be expire, what is contact details of the site with the following informations. In a nutshell, it includes these informations;

Domain Name: CHAIRFAG.COM
Registry Domain ID: 909573547_DOMAIN_COM-VRSN
Registrar WHOIS Server: whois.godaddy.com
Registrar URL: http://www.godaddy.com
Updated Date: 2017-04-05T14:27:32Z
Creation Date: 2007-04-04T18:41:24Z
Registry Expiry Date: 2019-04-04T18:41:24Z
Registrar: GoDaddy.com, LLC
Registrar IANA ID: 146
Registrar Abuse Contact Email: [email protected]
Registrar Abuse Contact Phone: 480-624-2505
Domain Status: clientDeleteProhibited https://icann.org/epp#clientDeleteProhibited
Domain Status: clientRenewProhibited https://icann.org/epp#clientRenewProhibited
Domain Status: clientTransferProhibited https://icann.org/epp#clientTransferProhibited
Domain Status: clientUpdateProhibited https://icann.org/epp#clientUpdateProhibited
Name Server: NS33.UK-NOC.COM
Name Server: NS34.UK-NOC.COM
DNSSEC: unsigned
URL of the ICANN Whois Inaccuracy Complaint Form: https://www.icann.org/wicf/
>>> Last update of whois database: 2017-09-04T12:47:19Z <<<

For more information on Whois status codes, please visit https://icann.org/epp

NOTICE: The expiration date displayed in this record is the date the
registrar's sponsorship of the domain name registration in the registry is
currently set to expire. This date does not necessarily reflect the expiration
date of the domain name registrant's agreement with the sponsoring
registrar. Users may consult the sponsoring registrar's Whois database to
view the registrar's reported date of expiration for this registration.

TERMS OF USE: You are not authorized to access or query our Whois
database through the use of electronic processes that are high-volume and
automated except as reasonably necessary to register domain names or
modify existing registrations; the Data in VeriSign Global Registry
Services' ("VeriSign") Whois database is provided by VeriSign for
information purposes only, and to assist persons in obtaining information
about or related to a domain name registration record. VeriSign does not
guarantee its accuracy. By submitting a Whois query, you agree to abide
by the following terms of use: You agree that you may use this Data only
for lawful purposes and that under no circumstances will you use this Data
to: (1) allow, enable, or otherwise support the transmission of mass
unsolicited, commercial advertising or solicitations via e-mail, telephone,
or facsimile; or (2) enable high volume, automated, electronic processes
that apply to VeriSign (or its computer systems). The compilation,
repackaging, dissemination or other use of this Data is expressly
prohibited without the prior written consent of VeriSign. You agree not to
use electronic processes that are automated and high-volume to access or
query the Whois database except as reasonably necessary to register
domain names or modify existing registrations. VeriSign reserves the right
to restrict your access to the Whois database in its sole discretion to ensure
operational stability. VeriSign may restrict or terminate your access to the
Whois database for failure to abide by these terms of use. VeriSign
reserves the right to modify these terms at any time.

The Registry database contains ONLY .COM, .NET, .EDU domains and
Registrars.

  REGISTRAR GoDaddy.com, LLC

SERVERS

  SERVER com.whois-servers.net

  ARGS domain =chairfag.com

  PORT 43

  TYPE domain

DOMAIN

  NAME chairfag.com

  CHANGED 2017-04-05

  CREATED 2007-04-04

STATUS
clientDeleteProhibited https://icann.org/epp#clientDeleteProhibited
clientRenewProhibited https://icann.org/epp#clientRenewProhibited
clientTransferProhibited https://icann.org/epp#clientTransferProhibited
clientUpdateProhibited https://icann.org/epp#clientUpdateProhibited

NSERVER

  NS33.UK-NOC.COM 205.234.110.53

  NS34.UK-NOC.COM 83.223.98.50

  REGISTERED yes

Mistakes

The following list shows you to spelling mistakes possible of the internet users for the website searched .